The µlogger 4R - For measuring Temperature with a thermistor or resistance

Technical Specification

A 4R data logger from Zeta-tec.

This model of µlogger (pronounced micro-logger) has four resistance channels; usually for connecting to our high quality thermistor based temperature sensors but can be connected to any sensor that produces a 100 - 50k Ohm output. We supply a standard set of look-up tables and we will normally generate (for free) any other look-up tables that customers require.

High quality precision components are used throughout.
The supplied software allows the µlogger to be configured before leaving it at the logging site. At the end of the logging period your data is offloaded and can be displayed and analysed using the same software.


Technical Specifications:

* Four separate channels measuring channels usually for connecting to our high quality thermistor sensors (-40°C - +85°C).
* 12 bit (0.025%) resolution with a basic 0.25% accuracy, 8-bit and 10-bit resolution can also be set to maximise memory usage.
* Four input channels; one, two, three, or all four channels can log simultaneously. Lookup tables can be applied to all channels to change measured units.
* Logging interval 1sec. - 12 hours.
*Up to 32000 measurements (depending on resolution required) can be recorded.
* Accepts any sensor that produces an output in the range 500 - 50k Ohm. We can easily generate look-up tables for new sensors.
* Can operate for over two years on an AA battery.
* Up to 32000 samples can be stored in non-volatile memory.
* Small size: 50mm. x 24mm. x 90mm
* High specification industrial grade components used throughout for maximum reliability.

Part No: ZT-1002

Download the data sheet as an Adobe PDF File (right click and "save as")
(get a free reader here)

Contacting Zeta-tec