The µlogger 4V for measuring voltage
The µlogger - 4V
(pronounced micro-logger) is a small, high quality and versatile
battery powered remote data logger. The µlogger has four voltage
(0 -2v) inputs channels. Additionally the µlogger can be used
with alternative sensors, leads and supplied lookup tables to measure
parameters like current, light level, barometric pressure, humidity,
strain or 4-20 ma.
High quality precision components are used throughout.
The software allows the µlogger to be configured before leaving it at the logging
site. At the end of the logging period your data is offloaded and
can be displayed and analysed using the same software.
Four separate channels
Up to 12 bit (0.025%)
resolution with a basic 0.25% accuracy, 8-bit and 10-bit resolution can
also be set to maximise memory usage.
Voltage input 0 -
2Volts. Easily scalable with external resistors and lookup tables.
Friendly PC configuration
and display software.
Four basic input
channels; one, two, three, or all four channels can log simultaneously.
Lookup tables can be applied to all channels to change measured units and
scaling.
Up to 32000 measurements
(depending on resolution required) can be recorded.
Logging interval 1sec. - 12 hours.
1 AA user replaceable
battery (lasts for up to two years with standard use - supplied with a µlogger).
High specification
industrial grade components used throughout for maximum reliability.
Part No: ZT-1003
Data logger and data logging solutions
Home